General Electric N410

Drawing

Connection Diagram N/A

Specifications



Get full specifications on General Electric N410 Severe Duty, IEEE 841, Metric Motor

Category: Severe Duty, IEEE 841, Metric MotorProduct Line: A$D UltraHP: 2
KW: 1.5RPM: 1500Voltage: 400
Enclosure: TEFCFrame: 90LMotor Standards: IEC
Phase: 3HP: 2Ingress Protection: IP55
Insulation Class: HKW: 1.5Motor Standards: IEC
Motor Type: AC MotorMount: F1/F2Nameplate: 316 Stainless Steel
Paint: Buff, Epoxy esterHertz: 50Rotor: Cast Aluminum
RPM: 1500Service Factor: 1.00Space Heaters: Optional
Temperature Rise: 80C @ 1.0 SFThermostats Thermistors: Consult ManufacturerVoltage: 400
Enclosure: TEFCBearings DE: 6205ZC3Bearings NDE: 6205ZC3
Efficiency: IE3Elevation: 1000mFrame: 90L
Frame Material: Cast IronFull Load Efficiency: 85.8
Area Classification: Division 2, Zone 2Temp Code: T3
Safe Stall Time hot: 41Safe Stall Time Cold: 60Rotor Inertia lb ft: 0.01
Power Factor 75%: 66.54Power Factor 50%: 52.75Power Factor 100%: 76.88
No Load Current: 1.9Breakdown Torque: 438.94Max Allowable Inertia lb ft: 6.78
Locked Rotor Torque: 415.52Locked Rotor Current: 22.95Full Load Speed: 1435
Full Load Current: 3.3Efficiency 75%: 85.61Efficiency 50%: 84.6
Efficiency 100%: 85.06
CT: 20:1VT: 1000:1

No Information Available


N410 Crossovers

No Crossovers for this listing

The General Electric N410 electric motor has 2 HP, 1500 RPM, 400 Voltage, 90L Frame & TEFC Enclosure. N410 has 0 Crossovers. Visit our General Electric Catalog. Discuss N410 with a community of industry professionals on our General Electric forum.